![background image](http://html.mh-extra.com/html/alfa-romeo/alfa-147-gta/alfa-147-gta_owners-manual_2895465021.webp)
GETTING TO KNOW YOUR CAR
20
To bring the seat back to its
normal position
Proceed as follows:
– move the seat belts to the side extend-
ing them correctly without twisting;
– raise the seat backs, pushing them back-
wards until hearing both clamping devices
click into place, checking that the “red
band” can no longer be seen on the upper
part of the levers (
A-fig. 21
). In fact, this
“red band” indicates that the seat back is
not clamped;
– set the cushions to the horizontal posi-
tion keeping the centre seat belt raised;
– refit the headrests.
– raise the headrests to the highest posi-
tion, press both buttons (
A-fig. 20
) at the
side of the two supports, then remove the
headrests pulling them upwards.
– move the seat belts to the side extend-
ing them correctly without twisting;
– raise the levers (
A-fig. 21
) retaining
the back rests and tilt them forwards to ob-
tain a single loading surface (
fig. 22
).
IMPORTANT
For versions/markets
where applicable, the retainer levers are re-
placed by buttons (one for each side). To re-
lease the back rests and tilt them, use the
buttons themselves.
Partial extension
For partial extension, proceed as follows:
– tilt the cushion required pulling the han-
dle at the centre of the cushion, then tilt-
ing the actual cushion;
– raise the headrests of the seat to be tilt-
ed to the highest position, press both but-
tons at the side of the two supports and re-
move the headrests pulling them upwards;
– move the seat belt to one side extend-
ing it correctly without twisting;
– raise the lever retaining the back rest
and tilt it forwards.
fig. 20
A0A0469m
fig. 22
A0A0470m
fig. 21
A0A0031m
Summary of Contents for Alfa 147 GTA
