manualshive.com logo in svg

Alfa Romeo Alfa 147 GTA, Owner'S Manual

The Alfa Romeo Alfa 147 GTA Owner's Manual is available for free download on manualshive.com. This comprehensive manual provides users with detailed instructions on operating and maintaining their Alfa 147 GTA, ensuring optimal performance and longevity. Get your manual today and enhance your Alfa Romeo ownership experience.

Share
Download
background image

GETTING TO KNOW YOUR CAR

133

HEADLIGHT ADJUSTMENT
ABROAD

(

fig. 135

)

The dipped-beam headlights are adjusted

for circulation in the country in which the ve-
hicle is marketed. In countries with opposite
circulation, to avoid glaring oncoming vehi-
cles it is necessary to cover the areas of the
headlight as shown below; this is done us-
ing non-transparent sticker tape.

The illustration refers to passing from right-

hand drive to left-hand drive.

GAS DISCHARGE 
HEADLIGHTS

(optional for versions/markets
where applicable)

The gas (xenon) discharge headlights op-

erate with a voltaic arc, in an ambient sat-
urated with pressure xenon, instead of the
glow filament.

The resulting illumination is sensibly high-

er to that of conventional lamps, both for
light quality (clearer light) and for the width
and positioning of the illuminated area. 

The advantages of better illumination can

be perceived (due to less eyesight fatigue
and greater orientation capacity for the dri-
ver, which in turn means higher driving safe-
ty) especially in case of bad weather, fog
and/or insufficient road signs, thanks to the
better illumination of the side parts of the
visual field, normally obscured.

The large increase of the side part illumi-

nation increases driving safety since it allows
the driver to better see the other users on
the edge of the road (pedestrians, cyclists
and bikers).

The triggering of the voltaic arc requires a

very high voltage, while subsequent power
supply can take place at a low voltage. 

The headlights achieve their top luminosi-

ty approx. 15 seconds after they are switched
on.

The intense light produced by this type of

headlights requires the use of an automat-
ic system to keep headlight trim constant
and avoid dazzling the vehicles coming from
the opposite direction in case of braking, ac-
celeration or when carrying loads.

The electric mechanical system for auto-

matically keeping the trim constant, makes
unnecessary the device for compensating
the headlight dip and the visual indication
of the position on the display.

Xenon lights have a very long life, there-

fore breakdowns are unlikely.

If necessary, have the sys-
tem checked and repaired

only by Alfa Romeo Authorized
Services.

WARNING

Summary of Contents for Alfa 147 GTA



































































































































































































































































































Reviews:

No comments

Related manuals for Alfa 147 GTA

ZAPTEC Go Instruction Manual preview
Go
Brand: ZAPTEC Pages: 240
hager witty park XEV6 Series Installation Manual preview
witty park XEV6 Series
Brand: hager Pages: 9
Ignition 63-231 Quick Start preview
63-231
Brand: Ignition Pages: 1
Jeep PATRIOT 2013 Specifications preview
PATRIOT 2013
Brand: Jeep Pages: 5
Jeep PATRIOT 2012 Specifications preview
PATRIOT 2012
Brand: Jeep Pages: 6
Jeep Grand Cherokee SRT 2014 Operating Manual preview
Grand Cherokee SRT 2014
Brand: Jeep Pages: 345
Jeep Grand Cherokee 2015 User Manual preview
Grand Cherokee 2015
Brand: Jeep Pages: 236
Jeep Grand Cherokee Quick Manual To Repairs preview
Grand Cherokee
Brand: Jeep Pages: 18
Jeep Grand Cherokee Quick Reference Manual preview
Grand Cherokee
Brand: Jeep Pages: 24
Jeep Compass 2015 Owner'S Manual preview
Compass 2015
Brand: Jeep Pages: 560
Jeep Compass 2013 Owner'S Manual preview
Compass 2013
Brand: Jeep Pages: 525
Jeep Cherokee 2019 User Manual preview
Cherokee 2019
Brand: Jeep Pages: 308
Jeep CHEROKEE 2017 Manual preview
CHEROKEE 2017
Brand: Jeep Pages: 86
Jeep CHEROKEE 2017 Owner'S Manual preview
CHEROKEE 2017
Brand: Jeep Pages: 638
Jeep 2022 CHEROKEE Quick Start Manual preview
2022 CHEROKEE
Brand: Jeep Pages: 9
Jeep 2014 Patriot Service Information preview
2014 Patriot
Brand: Jeep Pages: 51
Jeep Jeep Wrangler Buyer'S Manual preview
Jeep Wrangler
Brand: Jeep Pages: 4
Jeep Jeep Wrangler Owner'S Manual Supplement preview
Jeep Wrangler
Brand: Jeep Pages: 50

Brands by name

Popular brands

Load more brands