Alfa Romeo Alfa 147 GTA, Owner'S Manual

Page: 201 / 290

IN AN EMERGENCY
200
Main beam headlights
(fig. 24b)
To change the bulb, proceed as follows:
– Remove the protective cover releasing
the locking screws.
– Disconnect the electric connector ( A ).
– Release the bulb catch ( B ).
– Remove the bulb and replace it.
– Fit a new bulb making the tabs of the
metallic part coincide with the grooves on
the reflector, then hook the bulb holder
catch (
B ).
– Reconnect the electric connector ( A ).
– Refit the protective cover correctly.
HALOGEN LIGHTS The front light units contain the dipped
beam, main beam and fog light bulbs.
The bulbs are arranged inside the light unit
as follows ( fig. 25a ):
(
A
) Fog lights.
( B ) Dipped beam headlights
( C ) Sidelights.
( D ) Main beam headlights
To change the bulbs of the sidelights, low
beams and main beams it is necessary to
remove the cover (
A-fig. 25b
) releasing
the catches (
B
).
To change the fog lights, remove the cov-
er ( C ) turning counter-clockwise.
IMPORTANT See the previous chap-
ter “When needing to change a bulb” for
the type of bulb and power rating.
fig. 25a
A0A0159m
fig. 25b
A0A0160m
fig. 24b
A0A0502m
Alterations or repairs to
the electric system not car-
ried out correctly and without tak-
ing account of the system specifi-
cations may cause failures and the
risk of fire.
WARNING