manualshive.com logo in svg

Alfa Romeo Alfa 147 GTA, Owner'S Manual, Page: 226 / 290

Share
Download
Alfa Romeo Alfa 147 GTA Owner'S Manual Download Page 226

VEHICLE MAINTENANCE

225

IMPORTANT 
Engine oil

Should prevailing use of the car be under

one of the following specially heavy condi-
tions:

– trailer or caravan towing

– dusty roads

– frequently idling engines or long distance

low speed driving or in case of a long term
inactivity

– short distances (less than 7-8 km) re-

peated and with external temperatures be-
low zero replace engine oil more frequent-
ly than required on Service Schedule.

IMPORTANT 
Air cleaner

Using the car on dusty roads change the

air cleaner more frequently than specified in
the Scheduled Maintenance Programme.

For any doubts concerning the intervals be-

tween engine oil and air cleaner replacement
in relation to how the vehicle is used, con-
tact Alfa Romeo Authorised Services.

IMPORTANT 
Battery

It is advisable to check the battery charge,

preferably at the onset of winter, to prevent
the possibility of the electrolyte freezing.

This check should be carried out more fre-

quently if the car is used mainly for short
trips, or if it is fitted with accessories that
permanently absorb electricity even with the
ignition key removed, especially in the case
of after market accessories.

If the vehicle is used in hot climates or par-

ticularly harsh conditions it is wise to check
the level of the battery fluid (electrolyte)
more frequently than specified in the Sched-
uled Maintenance Programme.

Vehicle maintenance should

be entrusted to Alfa Romeo
Authorised Services. For

routine and minor maintenance op-
erations you wish to carry out your-
self, always make sure you have the
proper equipment, genuine Alfa
Romeo spares and the necessary flu-
ids;do not however carry out these
operations if you have no experi-
ence.

IMPORTANT 
Pollen filter

If the vehicle is used frequently in dusty or

heavily polluted environments it is advisable
to replace the filtering element more fre-
quently; in particular it should be replaced
if a reduction of the amount of air admitted
to the passenger compartment is noted.

Summary of Contents for Alfa 147 GTA



































































































































































































































































































Reviews:

No comments