manualshive.com logo in svg

Alfa Romeo Alfa 147 GTA, Owner'S Manual, Page: 191 / 290

Share
Download
Alfa Romeo Alfa 147 GTA Owner'S Manual Download Page 191

IN AN EMERGENCY

190

IMPORTANT

The car is equipped with

“Kit for tyre quick repair Fix&Go“, see the
instructions contained in the following chap-
ter.

STARTING BY INERTIA

IN THE EVENT OF A PUNCTURE

Never push, tow or coast

start the vehicle. This could
cause fuel to flow into the

catalyst damaging it irreversibly.

Remember that the engine
brake and power steering

are not operational until the engine
is started, therefore, much greater
effort than usual is needed on the
brake pedal and steering wheel.

WARNING

Signal the presence of the
stationary vehicle according

to the current regulations: hazard
warning lights, reflecting triangle,
etc. Any passengers should leave
the car.

WARNING

Should the type of wheels

used be changed (alloy

rims instead of steel), it is also nec-
essary to replace the complete kit
of fastening bolts with others of
suitable size.

WARNING

Summary of Contents for Alfa 147 GTA



































































































































































































































































































Reviews:

No comments