manualshive.com logo in svg

Alfa Romeo Alfa 147 GTA, Owner'S Manual, Page: 6 / 290

Share
Download
Alfa Romeo Alfa 147 GTA Owner'S Manual Download Page 6

5

THE SYMBOLS USED IN THIS BOOKLET

The symbols illustrated in these pages show the subjects

which should, in particular, be closely studied.

This indicates the correct procedures 

to be followed to prevent the vehicle from

damaging the environment.

Warning. Partially or 

fully ignoring these rules may lead to 

serious injury.

Warning. Partially or fully ignoring these

rules may lead to serious damage being

caused to the vehicle which, in some

circumstances, may cause forfeiture 

of the warranty cover.

PERSONAL
SAFETY

PROTECTING THE
ENVIRONMENT

VEHICLE
SAFETY

The texts, illustrations and specifications given in this booklet refer to the vehicle

at the time of going to press.

As part of our ongoing striving to improve our products, Alfa Romeo may introduce technical changes during

production, therefore the specifications and fittings may be altered without prior notice. 

For details on this subject, please apply to the manufacturer’s sales network.

Summary of Contents for Alfa 147 GTA



































































































































































































































































































Reviews:

No comments