Alfa Romeo Alfa 147 GTA Page 189 Owner'S Manual Download

Page: 189 / 290

IN AN EMERGENCY

188

3) Fully depress the accelerator pedal and

keep it pressed. The

warning light will

come on for eight seconds and then go off,
now release the accelerator pedal.

4) The

warning light begins to flash:

after it has flashed the same number of
times as the first digit on the CODE card,
press the accelerator pedal and keep it
pressed until the

warning light turns on

(for four seconds) and then goes off, now
release the accelerator pedal.

5) The

warning light starts to flash: af-

ter the number of flashes corresponding to
the second digit on the CODE card, press the
accelerator pedal and keep it pressed.

6) Repeat this procedure for the remain-

ing digits on the CODE card.

7) After entering the last figure, keep the

accelerator pedal pressed. The

warn-

ing light turns on (for four seconds) and
then goes off; now release the accelera-
tor pedal.

8) A quick flash of the

warning light

(for about 4 seconds) confirms that the op-
eration has been carried out correctly.

9) Start the engine turning the ignition key

from

MAR

AVV

without returning the

key to the

STOP

position.

Conversely, if the

warning light stays

on, turn the key to

STOP

and repeat the

procedure starting from point 1).

IMPORTANT

After emergency starting

it is advisable to contact an Alfa Romeo Au-
thorised Service, because the emergency
procedure must be repeated each time the
engine is started.

EMERGENCY
STARTING

If it is not possible to deactivate the engine

inhibitor with the Alfa Romeo CODE system,
the

and

warning lights stay on and

the engine will not start. Emergency start-
ing is needed to start the engine.

IMPORTANT

You are advised to care-

fully read the entire procedure before car-
rying it out.

If a mistake is made during the emergency

procedure, the ignition key should be turned
to

STOP

and the operations must be re-

peated from the start (point 1).

1) Read the 5-figure electronic code on the

CODE card.

2) Turn the ignition key to

MAR

Summary of Contents for Alfa 147 GTA



































































































































































































































































































Search results

Summary of Contents for Alfa 147 GTA

Reviews:

Related manuals for Alfa 147 GTA

Brands by name

Popular brands

Alfa Romeo Alfa 147 GTA, Owner'S Manual

Search results

Summary of Contents for Alfa 147 GTA

Reviews:

Related manuals for Alfa 147 GTA

Brands by name

Popular brands