manualshive.com logo in svg

Alfa Romeo Alfa 147 GTA, Owner'S Manual, Page: 42 / 290

Share
Download
Alfa Romeo Alfa 147 GTA Owner'S Manual Download Page 42

GETTING TO KNOW YOUR CAR

41

Turning the ignition key to
MAR the 

F

warning light

(with the passenger’s front Air bag
deactivation switch at ON) turns
on for about 4 seconds, and then
flashes for another 4 seconds to
remind that the passenger’s Air
bag and corresponding side Air
bags will be activated in the event
of a crash, then it goes off.

WARNING

Do not hook rigid objects to
the coat hooks and to the

support handles.

WARNING

Do not wash the seat back
with pressurised water or

steam (by hand or at automatic
seat washing stations).

WARNING

The front Air bags are de-
signed to be triggered for

heavier crashes than the preten-
sioners. It is therefore normal for
the pretensioners only to be trig-
gered for crashes within the two
activation thresholds.

WARNING

The air bag does not re-
place the seat belts, but in-

creases their effectiveness. Addi-
tionally, as the front air bags are
not triggered for head-on collision
at low speed, side crashes, crash-
es from behind or overturning, in
these cases the occupants are pro-
tected only by the seat belts, which
must, therefore, always be fas-
tened.

WARNING

Summary of Contents for Alfa 147 GTA



































































































































































































































































































Reviews:

No comments