Alfa Romeo Alfa 147 GTA, Owner'S Manual, Page: 205 / 290

IN AN EMERGENCY
204
– Withdraw the light unit outwards.
– Slacken the electric connector ( C ).
– Slacken the screws ( D ), and remove
the bulb holder.
– Remove the bulb pushing gently and
turning counter-clockwise.
– Replace the bulb, then refit the bulb
holder and tighten the screws ( D ).
– Re-tighten the electric connector ( C ).
– Refit the light unit on the tailgate tight-
ening the nuts ( B ) then refit the cap ( A )
pressing it on.
REAR DIRECTION INDICATORS
REAR SIDELIGHTS-BRAKING
LIGHT
(
fig. 33-34
)
The rear direction indicators and the side
light-braking light are in the tail light unit fas-
tened to the body.
To change the bulb, proceed as follows:
– From inside the boot, open the pre-
formed trim ( A ) then, using the extension
and the screwdriver provided (working as il-
lustrated) slacken the nuts (
B ) fastening
the light unit.
– Withdraw the light unit outwards.
– Disconnect the electric connector (
C
).
– Slacken the screw ( D ), and remove the
bulb holder.
– Remove the bulb to be changed push-
ing gently and turning counter-clockwise:
(
E ) - bulb for rear sidelight-braking light.
( F ) - bulb for rear direction indicators.
– Replace the bulb, then refit the bulb
holder and tighten the screw ( D ).
– Re-connect the electric connector ( C ).
– Refit the light unit on the body tighten-
ing the screws ( B ).
– Close the preformed trim ( A ).
fig. 35
A0A0170m
fig. 34
A0A0169m
fig. 33
A0A0168m