ALDI Workzone titanium SHW196 Page 7 User Manual Download

Page: 7 / 56

Description of symbols

Warning: Do not direct the jet at persons, animals and

electrical equipment

Warning / Read the manual

Appliance not suitable for connection to the drinking

water mains without backflow connector.

Warning: Do not inhale fumes

Conforms to relevant standards for electrical safety and

electromagnetic compatibility.

Lead-acid battery This product has been marked

with a symbol relating to ‘separate collection’ for all

battery packs and battery pack. It will then be recycled

or dismantled in order to reduce the impact on the

environment. Battery packs can be hazardous for the

environment and for human health since they contain

hazardous substances.

The instruction manual, rating plate, or on the product itself, may

show these symbols. These represent important information about the

product or instructions on its use.

DANGEROUS

Summary of Contents for Workzone titanium SHW196

























































Search results

Summary of Contents for Workzone titanium SHW196

Reviews:

Related manuals for Workzone titanium SHW196

Brands by name

Popular brands

ALDI Workzone titanium SHW196, User Manual

Search results

Summary of Contents for Workzone titanium SHW196

Reviews:

Related manuals for Workzone titanium SHW196

Brands by name

Popular brands