210cc 4 stroke Petrol High Pressure Washer
AFTER SALES SUPPORT
(toll free)
MODEL No.: SHW196 • 06/2019 9885
e-mail: [email protected]
AUS
33
1300 889 028
AUS
NOZZLE TYPE
COLOR
USED FOR
0° high pressure nozzle
Red
For particularly stubborn
accumulation of grime.
NOT TO BE USED FOR:
Soft materials like sidings, decks,
painted surfaces, cars.
15° high pressure nozzle
Yellow
For dirt accumulation over a
surface.
25° high pressure nozzle
White
For dirt accumulation over a
large surface.
40° high pressure nozzle
Green
For moderate dirt accumulation
over a large surface.
Soap high pressure nozzle
Black
For operating with detergents or
cleaning with low pressure.
START CLEANING (see fig. Q )
NOTE:
It is recommended to test the pressure of the hose and the
nozzle on a test material in a safe area before use. High pressure can
damage surfaces and lift paint.
1) After starting the engine, first point the gun (19) without nozzle to
a safe place and spray some water for about 5 seconds in order to
squeeze out the air pressure inside. Release the trigger switch (41) to
turn off the gun (19)
2) Install the nozzle (2) onto the spray gun (19).
3) Hold the spray gun (19) with both hands.
4) Direct the nozzle (2) away from yourself and others, towards the
surface to be cleaned.
5) Push the spray gun safety lock (44) to release the trigger switch (41).
Squeeze the trigger switch (41) on spray gun (19) and direct the
water jet at the selected object to be washed.
6) Hold the gun lance (16) an appropriate distance away from the
surface being cleaned to avoid damaging it. If working on a delicate
surface a further away distance is advised (see below for suggested
cleaning methods ).
7) For most effective cleaning, keep spray tip 15-20 cm away from the
surface to clean at a 45°angle.
8) Release the trigger switch (41) to stop the water jet.
Summary of Contents for Workzone titanium SHW196
Page 54: ...This page is blank ...
Page 55: ...This page is blank ...
