manualshive.com logo in svg

ALDI Workzone titanium SHW196, User Manual

Share
Download
ALDI Workzone titanium SHW196 User Manual Download Page 4

2

2

Pack contents / parts

Application

Congratulations on the purchase of your Workzone

®

 Titanium

 

210cc 4 

stroke Petrol High Pressure Washer. When you open your packaging, 

first remove all items and check there are no parts damaged or missing. 

If you find anything wrong, do not operate the product until the parts 

have been replaced or the fault has been rectified. Failure to do so 

could result in serious personal injury. 

NOTE: 

First time users or inexperienced operators pay particular 

attention to the operation of the 210cc 4 stroke Petrol High Pressure 

Washer, including details of starting and stopping and correct use of 

the 210cc 4 stroke Petrol High Pressure Washer on pages 28-35, as well 

as the maintenance instructions on pages 36-40.

Intended use of the 210cc 4 stroke Petrol High Pressure Washer

NOTE: 

This product is for private domestic DIY use only. 

It is not suitable for commercial, industrial or trade use. It is suitable for 

high pressure cleaning tasks on cars, boats, motorbikes, decks,

concrete, mold, grime, dust, and mud.

IMPORTANT INFORMATION.

NOTE: 

This is a 4 stroke High Pressure Washer.

It MUST be filled with SAE 10W-30 4 Stroke engine oil in the pump (47) 

and the 4 stroke engine oil sump BEFORE starting. 

NOTE: 

Your pressure washer is shipped from the manufacturer with

85-100ml of oil already in the pump, however, the oil in the pump does

need to be topped up per instructions on page 22-23.

Fresh unleaded fuel must be filled in the fuel tank.

DO NOT use Ethanol based fuels. Do NOT mix oil with fuel.

Summary of Contents for Workzone titanium SHW196

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands