210cc 4 stroke Petrol High Pressure Washer
AFTER SALES SUPPORT
(toll free)
MODEL No.: SHW196 • 06/2019 9885
e-mail: [email protected]
AUS
18
1300 889 028
AUS
Installing the nozzle holder panel (3) to the upper handle frame
(1) (see fig. C1-C4)
1) Attach the nozzle holder panel (3) to the upper handle frame (1)
by aligning the screw holes on the nozzle holder panel (3) with the
holes on the upper handle frame (1). Pay attention to the direction.
2) Insert the long screw with nyloc nuts for nozzle holder panel (36)
provided into each hole at the corner of the nozzle holder panel (3),
align and insert the nuts one by one, and then turn the panel over
to add the nuts to the ends of the screws and hand tighten.
3) Fully secure the screws by using the small wrench (33) to hold the
screws in position while using the 8mm wrench to secure the nuts.
4) Tighten all the 4 screws / nuts (36) to lock the nozzle holder panel (3)
in place.
C4
C1
C2
C3
Summary of Contents for Workzone titanium SHW196
Page 54: ...This page is blank ...
Page 55: ...This page is blank ...
