manualshive.com logo in svg

ALDI Workzone titanium SHW196, User Manual

Share
Download
ALDI Workzone titanium SHW196 User Manual Download Page 40

210cc 4 stroke Petrol High Pressure Washer

AFTER SALES SUPPORT

(toll free)

MODEL No.: SHW196 • 06/2019 9885

e-mail: [email protected]

AUS

38

 1300 889 028

AUS

NOTE:

Before performing any inspection, maintenance and cleaning, stop the 

engine and let the product cool down.

Inspect the product for damaged or worn parts before each use. 

Do not operate it if you find damaged or worn parts. Contact  the 

manufacturer for replacement parts.

Store the high pressure hose onto the hose reel 

After each use, turn OFF the engine, exhaust any pressure from 

pressure line, and coil the hose (6) onto the hose reel (4). Refer to 

Attach the 10m pressure hose (6) to the hose reel (4).

Checking the air filter (7) (see fig. T1-T3)

WARNING: The air filter should be checked after 

prolonged storage, the following steps should be done 

when checking the air filter. It is recommended to replace the 

air filter once every 40 hours.

WARNING! Never run the engine without the air filter 

element installed.

1)  Unscrew the cap on the air filter (7) cover anti-clockwise. Remove 

the cover.

2)  Remove the air filter (7), wash filter in kerosene. Then squeeze 

kerosene out, soak filter in engine oil and squeeze engine oil out.

3)  Re-position the filter in and re-position the air filter (7) cover. 

Tighten the nut clockwise.

T1

T2

T3

Maintenance

Summary of Contents for Workzone titanium SHW196

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands