ALDI Workzone titanium SHW196 User Manual Download

Page: 46 / 56

210cc 4 stroke Petrol High Pressure Washer

AFTER SALES SUPPORT

(toll free)

MODEL No.: SHW196 • 06/2019 9885

e-mail: [email protected]

AUS

1300 889 028

AUS

Your new Workzone

Titanium 210cc 4 stroke Petrol High Pressure

Washer will more than satisfy your expectations.

It has been manufactured under stringent Workzone

Titanium Quality

Standards to meet superior performance criteria.

You will find your new 210cc 4 stroke Petrol High Pressure Washer easy

and safe to operate, and, with proper care, it will give you many years

of dependable service.

CAUTION.

Carefully read through this entire instruction manual before

using your new Workzone

Titanium 210cc 4 stroke Petrol High Pressure

Washer. Take special care to heed the Cautions and Warnings.

Your Workzone

Titanium 210cc 4 stroke Petrol High Pressure Washer

has many features that will make your job faster and easier. Safety,

performance, and dependability have been given top priority in the

development of this 210cc 4 stroke Petrol High Pressure Washer, making

it easy to maintain and operate.

Use only Workzone

Titanium replacement parts for your product.

Non-conforming parts or modifications made to parts will void your

warranty.

Recycle unwanted materials instead of disposing of them as

waste. All tools, hoses and packaging should be sorted, taken to

the local recycling centre and disposed of in an environmentally

safe way.

Warranty

Environmental protection

Summary of Contents for Workzone titanium SHW196

























































Search results

Summary of Contents for Workzone titanium SHW196

Reviews:

Related manuals for Workzone titanium SHW196

Brands by name

Popular brands

ALDI Workzone titanium SHW196, User Manual

Search results

Summary of Contents for Workzone titanium SHW196

Reviews:

Related manuals for Workzone titanium SHW196

Brands by name

Popular brands