ALDI Workzone titanium SHW196 User Manual Download

Page: 11 / 56

WARNING

Do not use the machine within range of persons unless

they wear protective clothing.

WARNING

Do not direct the jet against yourself or others in order

to clean clothes or foot-wear.

WARNING

High pressure cleaners should not be used by children or

untrained personnel.

WARNING

Risk of explosion – Do not spray flammable liquids.

WARNING

To ensure machine safety, use only original spare parts

from the manufacturer or approved by the manufacturer.

WARNING

: High pressure hoses, fittings and couplings are

important for the safety of the appliance. Use only hoses, fittings

and couplings recommended by the manufacturer.

WARNING

Water that has flown through backflow preventers is

considered to be non-potable.

WARNING

The machine shall be disconnected by removing the ignition

key and by disconnecting the battery during cleaning or maintenance

and when replacing parts or converting the machine to another function.

WARNING

Do not use machine if important parts of the machine

are damaged, e.g. safety devices, high pressure hoses, trigger gun.

WARNING

Do not use combustion engine powered machines indoors

unless adequate ventilation is assessed by national labour authorities.

WARNING

Ensure that any exhaust emissions are not in the vicinity

of air intakes.

WARNING

It is important to provide adequate ventilation and make

sure that the fuel gases are properly discharged.

WARNING

Always switch off the mains disconnecting switch when

leaving the machine unattended.

WARNING

Incorrect fuels shall not be used as they may prove

hazardous.

- This machine must be attended during operation.

Summary of Contents for Workzone titanium SHW196

























































Search results

Summary of Contents for Workzone titanium SHW196

Reviews:

Related manuals for Workzone titanium SHW196

Brands by name

Popular brands

ALDI Workzone titanium SHW196, User Manual

Search results

Summary of Contents for Workzone titanium SHW196

Reviews:

Related manuals for Workzone titanium SHW196

Brands by name

Popular brands