Alcatel-Lucent 7750 SR-OS, Configuration Manual

Page: 517 / 674

Filter Policies
7750 SR OS Router Configuration Guide Page 517
MAC Filter Entry Commands
action
Syntax action drop
action forward
[ sap sap-id | sdp sdp-id ]
no action
Context config>filter>mac-filter>entry
Description
This command configures the action for a MAC filter entry. The action keyword must be entered for
the entry to be active. Any filter entry without the action keyword will be considered incomplete and
will be inactive.
If neither drop nor forward is specified, this is considered a No-Op filter entry used to explicitly set a
filter entry inactive without modifying match criteria or removing the entry itself.
Multiple action statements entered will overwrite previous actions parameters when defined. To
remove a parameter, use the no form of the action command with the specified parameter.
The no form of the command removes the specified action statement. The filter entry is considered
incomplete and hence rendered inactive without the action keyword.
Default none
Parameters drop — Specifies packets matching the entry criteria will be dropped.
forward — Specifies packets matching the entry criteria will be forwarded. Only Ethernet SAPs are
supported (including q-in-q, BCP, bridged Ethernet in Frame Relay or ATM).
If neither drop nor forward is specified, the filter action is no-op and the filter entry is inactive.
sap sap-id — Specifies the physical port identifier portion of the SAP definition. Refer to Common
CLI Command Descriptions on page 661 for SAP CLI command syntax and parameter
descriptions.
match
Syntax match [ frame-type 802dot3 | 802dot2-llc | 802dot2-snap | ethernet_II ]
no match
Context config>filter>mac-filter>entry
Description This command creates the context for entering/editing match criteria for the filter entry and specifies
an Ethernet frame type for the entry. When the match criteria have been satisfied the action associated
with the match criteria is executed.
If more than one match criteria (within one match statement) are configured then all criteria must be
satisfied (AND function) before the action associated with the match will be executed.
A match context may consist of multiple match criteria, but multiple match statements cannot be