Alcatel-Lucent 7750 SR-OS, Configuration Manual

Page: 262 / 674

Show Commands
Page 262 7750 SR OS Router Configuration Guide
status
Syntax status
Context show>router
Description This command displays the router status.
Output Router Status Output — The following table describes the output fields for router status
information.
Sample Output
Note that there are multiple instances of OSPF. OSPF-0 is persistent. OSPF-1 through OSPF-31 are
present when that particular OSPF instance is configured.
*A:Performance# show router status
================================================================
Router Status (Router: Base)
================================================================
Admin State Oper State
----------------------------------------------------------------
Label Description
Router The administrative and operational states for the router.
OSPF The administrative and operational states for the OSPF protocol.
RIP
The administrative and operational states for the RIP protocol.
ISIS The administrative and operational states for the IS-IS protocol.
MPLS The administrative and operational states for the MPLS protocol.
RSVP
The administrative and operational states for the RSVP protocol.
LDP The administrative and operational states for the LDP protocol.
BGP The administrative and operational states for the BGP protocol.
Max Routes
The maximum number of routes configured for the system.
Total Routes The total number of routes in the route table.
ECMP Max Routes The number of ECMP routes configured for path sharing.
service-id
state —
Current single SFM state
start —
Last time this vRtr went into overload, after having
respected the hold-off time
interval —
How long the vRtr remained or is in overload
Triggered Poli-
cies
No —
Triggered route policy re-evaluation is disabled.
Yes —
Triggered route policy re-evaluation is enabled.