Alcatel-Lucent 7750 SR-OS, Configuration Manual

Page: 651 / 674

Cflowd
7750 SR OS Router Configuration Guide Page 651
ip-int-name — Display only information for the IP interface with the specified name.
Default
all interfaces with cflowd enabled.
Output cflowd Interface Output —
The following table describes the show cflowd interface output
fields.
Sample Output
B:sr-002# show cflowd interface [ip-addr | ip-int-name]
===============================================================================
Cflowd Interfaces
===============================================================================
Interface Router IF Index Mode Admin
IPv4 Address Oper IPv4
IPv6 Address Oper IPv6
-------------------------------------------------------------------------------
ipv4ipv6NamedIf Base 381 intf/ing Up
5.5.5.5/24 Up
55::55/128 Up
ipv4NamedIf 5 254 acl-egr Up
10.10.10.10/24 Up
N/A Down
ipv6NamedIf Base 380 i/f-both Up
N/A Down
1234:5678::9/128 Up
-------------------------------------------------------------------------------
Interfaces : 3
===============================================================================
Label Description
Interface
Displays the physical port identifier.
IPv4 Address
Displays the primary IPv4 address for the associated IP interface.
IPv6 Address Displays the primary IPv6 address for the associated IP interface.
Router
Displays the virtual router index (Base = 0).
IF Index
Displays the Global IP interface index.
Mode
Displays the cflowd sampling type and direction.
intf — Interface based sampling
acl — ACL based sampling
ingr — Ingress sampling
egr — Egress sampling
both — Both ingress and egress sampling
Admin
Displays the administrative state of the interface.
Opr-IPv4 Displays the operational state for IPv4 sampling.
Opr-IPv6
Displays the operational state for IPv6 sampling.