Alcatel-Lucent 7750 SR-OS Configuration Manual Download Page 60

Page: 60 / 674

Configuration Notes

Page 60

7750 SR OS Router Configuration Guide

Configuration Notes

The following information describes router configuration caveats.

•

A system interface and associated IP address should be specified.

•

Boot options file (BOF) parameters must be configured prior to configuring router
parameters.

•

Confederations can be configured before protocol connections (such as BGP) and peering
parameters are configured.

•

IPv6 interfaces and associated routing protocols may only be configured on the following
systems:



Chassis systems running in chassis mode c or d.



Chassis systems running in mixed-mode with IPv6 functionality limited to those
interface on slots with IOM3-XPs/IMMs or later line cards.



7750 SR-c4/12.

•

An iom2-20g and a SFM2 card are required to enable the IPv6 CPM filter and per-peer
queuing functionality.

Summary of Contents for 7750 SR-OS



































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 7750 SR-OS

Reviews:

Related manuals for 7750 SR-OS

Brands by name

Popular brands

Alcatel-Lucent 7750 SR-OS, Configuration Manual

Search results

Summary of Contents for 7750 SR-OS

Reviews:

Related manuals for 7750 SR-OS

Brands by name

Popular brands