Alcatel-Lucent 7750 SR-OS, Configuration Manual

Page: 201 / 674

IP Router Configuration
7750 SR OS Router Configuration Guide Page 201
Show Commands
aggregate
Syntax aggregate [ family ] [ active ]
Context show>router
Description
This command displays aggregate routes.
Parameters
family — Specifies to display IPv4 or IPv6 aggregate routes.
Values
ipv4, ipv6
active — When the active keyword is specified, inactive aggregates are filtered out.
Sample Output
*A:CPM133>config>router# show router aggregate
===============================================================================
Aggregates (Router: Base)
===============================================================================
Prefix Aggr IP-Address Aggr AS
Summary AS Set State
NextHop Community NextHopType
-------------------------------------------------------------------------------
10.0.0.0/8 0.0.0.0 0
False False Inactive
100:33 Blackhole
-------------------------------------------------------------------------------
No. of Aggregates: 1
===============================================================================
*A:CPM133>config>router#
arp
Syntax arp [ ip-int-name | ip-address/mask | mac ieee-mac-address | summary ] [ local | dynamic |
static | managed ]
Context show>router
Description
This command displays the router ARP table sorted by IP address. If no command line options are spec-
ified, all ARP entries are displayed.
Parameters
ip-address/mask — Only displays ARP entries associated with the specified IP address and mask.
ip-int-name — Only displays ARP entries associated with the specified IP interface name.
mac ieee-mac-addr — Only displays ARP entries associated with the specified MAC address.
summary — Displays an abbreviate list of ARP entries.