Alcatel-Lucent 7750 SR-OS, Configuration Manual

Page: 501 / 674

Filter Policies
7750 SR OS Router Configuration Guide Page 501
dscp
Syntax dscp dscp-name
no dscp
Context config>filter>ip-filter>entry > match
config>filter>ipv6-filter>entry > match
Description
This command configures a DiffServ Code Point (DSCP) name to be used as an IP filter match
criterion.
The no form of the command removes the DSCP match criterion.
Default no dscp
Parameters dscp-name — Configure a dscp name that has been previously mapped to a value using the dscp-
name command. The DiffServ code point may only be specified by its name.
Values be, cp1, cp2, cp3, cp4, cp5, cp6, cp7, cs1, cp9, af11, cp11, af12, cp13, af13, cp15,
cs2, cp17, af21, cp19, af22, cp21, af23, cp23
dst-ip
Syntax dst-ip { ipv-address [ / mask ]} [ netmask
|
ip-prefix-list prefix-list-name ]
dst-ip { ipv6-address/prefix-length | mask | ipv6-prefix-list prefix-list-name }
no dst-ip
Context config>filter>ip-filter>entry > match
config>filter>ipv6-filter>entry > match
Description This command configures a destination IP address range to be used as an IP filter match criterion.
To match on the destination IP address, specify the address and its associated mask, 10.1.0.0/16. The
conventional notation of 10.1.0.0 255.255.0.0 may also be used.
The no form of the command removes the destination IP address match criterion.
Default none
Parameters ip-prefix — The IP prefix for the IP match criterion in dotted decimal notation.
Values 0.0.0.0 — 255.255.255.255
ipv6-address — The valid IPv6 prefix for the IP match criterion in dotted decimal notation.
Values 0.0.0.0 — 255.255.255.255
ip-prefix-list — creates a list of IPv4 prefixes for match criteria in IPv4 ACL and CPM filter
policies.
ipv6-prefix-list — creates a list of IPv6 prefixes for match criteria in IPv6 ACL and CPM filter
policies.
ip-prefix-list-name — A string of up to 32 characters of printable ASCII characters. If special
characters are used, the string must be enclosed within double quotes.