Router Global Commands
Page 122
7750 SR OS Router Configuration Guide
Context
config>router
Description
This command triggers route policy re-evaluation.
By default, when a change is made to a policy in the
config router policy options
context and then
committed, the change is effective immediately. There may be circumstances when the changes
should or must be delayed; for example, if a policy change is implemented that would affect every
BGP peer on a router, the consequences could be dramatic. It would be more effective to control
changes on a peer-by-peer basis.
If the
triggered-policy
command is enabled, and a given peer is established, and you want the peer to
remain up, in order for a change to a route policy to take effect, a
clear
command with the
soft
or
soft
inbound
option must be used; for example,
clear router bgp neighbor x.x.x.x soft
. This keeps the
peer up, and the change made to a route policy is applied only to that peer or group of peers.
single-sfm-overload
Syntax
single-sfm-overload
[
holdoff-time
holdoff-time
]
no single-sfm-overload
Context
config>router
Description
This command, if enabled, will cause the OSPF for the service to enter an overload state when the
node has fewer than the full set of SFMs functioning. Once a significant amount of multicast capacity
is lost due to missing SFM(s) then the overload state will be entered.
The
no
form of this command causes the overload state to be cleared.
Default
no single-sfm-overload
Parameters
holdoff-time —
This parameter specifies the delay between the detection of a single SFM and
enacting the overload state.
Values
1— 600 seconds
Default
0 seconds
static-route
Syntax
[
no
]
static-route
{
ip-prefix/prefix-length
|
ip-prefix
netmask
} [
preference
preference
]
[
metric
metric
] [
tag
tag
] [
community
comm-id
] [
enable
|
disable
]
next-hop
ip-int-name |
ip-address
[
mcast-family
] [
bfd-enable
|{
cpe-check
cpe-ip-address
[
interval
seconds
]
[
drop-count
count
] [
log
]} {
prefix-list
prefix-list-name
[
all
|
none
]} |{
fc
fc-name
[
priority
{
low
|
high
}]} ] [
ldp-sync
]
[
no
]
static-route
{
ip-prefix/prefix-length
|
ip-prefix
netmask
} [
preference
preference
]
[
metric
metric
] [
tag
tag
] [
community
comm-id
] [
enable
|
disable
]
indirect
ip-address
[
ldp
|
rsvp-te
[
disallow-igp
]] [
cpe-check
cpe-ip-address
[
interval
seconds
] [
drop-count
count
]
[
log
]] {
prefix-list
prefix-list-name
[
all
|
none
]} |{
fc
fc-name
[
priority
{
low
|
high
}]}
Summary of Contents for 7750 SR-OS
