Alcatel-Lucent 7750 SR-OS, Configuration Manual

Page: 502 / 674

IP (v4/v6) Filter Entry Commands
Page 502 7750 SR OS Router Configuration Guide
mask — Eight 16-bit hexadecimal pieces representing bit match criteria.
Values x:x:x:x:x:x:x (eight 16-bit pieces)
netmask — Any mask epressed in dotted quad notation.
Values 0.0.0.0 — 255.255.255.255
dst-ip
Syntax dst-ip [ ipv6-address / prefix-length|ipv6-prefix-list/ipv6-prefix-list-name ]
no dst-ip
Context config>filter>ipv6-filter>entry>match
Description This command matches a destination IPv6 address.
To match on the destination IPv6 address, specify the address and prefix length, for example, 11::12/
128.
The no form of the command removes the destination IP address match criterion.
Default none
Parameters ipv6-prefix — The IPv6 prefix for the IP match criterion in dotted decimal notation.
Values ipv6-address x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x::d.d.d.d
x: [0..FFFF]H
d: [0..255]D
prefix-length — The IPv6 prefix length for the ipv6-address expressed as a decimal integer.
Values 1 — 128
ipv6-prefix-list — creates a list of IPv6 prefixes for match criteria in IPv6 ACL and CPM filter
policies.
ip-prefix-list-name — A string of up to 32 characters of printable ASCII characters. If special
characters are used, the string must be enclosed within double quotes.
dst-port
Syntax dst-port { lt | gt | eq } dst-port-number
dst-port port-list-name
dst-port range dst-port-number dst-port-number
no dst-port
Context config>filter>ip-filter>entry > match
config>filter>ipv6-filter>entry>match
Description This command configures a destination TCP or UDP port number or port range for an IP filter match
criterion. Note that an entry containing Layer 4 match criteria will not match non-initial (2nd, 3rd,