Alcatel-Lucent 7750 SR-OS, Configuration Manual

Page: 547 / 674

Filter Policies
7750 SR OS Router Configuration Guide Page 547
Output Show Filter (no filter-id specified) —
The following table describes the command output for the
command when no filter ID is specified.
Sample Output
A:ALA-48# show filter ipv6
===============================================================================
IP Filters
===============================================================================
Filter-Id Scope Applied Description
-------------------------------------------------------------------------------
100 Template Yes test
200 Exclusive Yes
-------------------------------------------------------------------------------
Num IPv6 filters: 2
===============================================================================
A:ALA-48# show filter ipv6 embedded
================================================
IP Filter embedding
================================================
In From Priority Inserted Status
----------------------------------------------------------------------------------
10 2 50 1/1 OK
1 100 1/2 OK- 1 entry overwritten
20 2 100 0/5 Failed – out of resources
================================================
A:ALA-48#
Label Description
Filter Id
The IP filter ID
Scope Template —
The filter policy is of type template.
Exclusive —
The filter policy is of type exclusive.
Applied No —
The filter policy ID has not been applied.
Yes —
The filter policy ID is applied.
Description The IP filter policy description.
In
Shows embedding filter index
From Shows embedded filters included
Priority Shows priority of embedded filter
Inserted
Shows embedded/total number of entries from embedded filter
Status:
OK —embedding operation successful, if any entries are overwritten
this will also be indicated.
Failed —embedding failed, the reason is displayed (out of resources).
In
Shows embedding filter index