Alcatel-Lucent 7710 SR SONET, Configuration Manual

Page: 395 / 496

Interface Configuration
7710 SR OS Interface Configuration Guide Page 367
Sample Output
A:SR12# show port 3/1/1 atm cp
=================================================================
ATM Connection Profiles, Port 3/1/1
=================================================================
Link Up —
A port that is physically present and has physical link
present.
Note that when
Link Up
appears at the lowest level of a SONET/SDH
path or a TDM tributary, it means the physical connection is active but
the port is waiting on some other state before data traffic can flow. It is
a waiting state and indicates that data traffic will not flow until it tran-
sitions to the
Up
state.
Link Down —
A port that is physically present but does not have a
link.
Cfg MTU
The configured MTU.
Oper MTU
The negotiated size of the largest packet which can be sent on the port
SONET/SDH, channel, specified in octets.
For channels that are used for transmitting network datagrams, this is
the size of the largest network datagram that can be sent on the chan-
nel.
LAG ID
The LAG or multi-link trunk (MLT) that the port is assigned to.
Port Mode
network —
The port is configured for transport network use.
access —
The port is configured for service access.
Port Encap
Null —
Ingress frames will not use tags or labels to delineate a ser-
vice.
dot1q —
Ingress frames carry 802.1Q tags where each tag signifies
a different service.
Port Type
The type of port or optics installed.
SFP/MDI MDX
GIGE —
Indicates the GigE SFP type.
FASTE —
Indicates the FastE SFP type.
GIGX —
Indicates the GigX SFP type.
MDI —
Indicates that the Ethernet interface is of type MDI (Media
Dependent Interface).
MDX —
Indicates that the Ethernet interface is of type MDX (Media
Dependent Interface with crossovers).
Label Description (Continued)