Alcatel-Lucent 7710 SR SONET, Configuration Manual

Page: 479 / 496

Interface Configuration
7710 SR OS Interface Configuration Guide Page 451
working — This command performs an exercise request on the port that is acting as the working circuit for
this APS group.
force
Syntax force aps-id { protect | working }
Context tools>perform
tools>dump>aps
Description
This command forces a switch to either the protect or working circuit
Parameters
aps-id — This option clears a specific APS on un-bundled SONET/SDH ports.
protect — This command clears a physical port that is acting as the protection circuit for the APS group.
working — This command clears a physical port that is acting as the working circuit for this APS group.
force
Syntax force ring-id path { 1 | 2 }
Context tools>perform>eth-ring
Description
This command forces a block on the ring port where the command is issued.
manual
Syntax manual ring-id path { 1 | 2 }
Context tools>perform>eth-ring
Description
In the absence of a failure or FS, this command forces a block on the ring port where the command is issued.
lockout
Syntax lockout aps-id
Context tools>perform
tools>dump>aps
Description
This command locks out the protection circuit.
Parameters
aps-id — Automated Protection Switching ID
Values
1 — 64