Card Commands
Page 172
7710 SR OS Interface Configuration Guide
Card Commands
card
Syntax
card slot-number
no card slot-number
Context
config
Description
This mandatory command enables access to the chassis card Input/Output Control Forwarding Module
(IOM/CFM), slot, MCM and MDA CLI context.
The
no
form of this command removes the card from the configuration. All associated ports, services, and
MDAs must be shutdown.
Default
No cards are configured.
Parameters
slot-number —
The slot number of the card in the chassis.
Values
1 — 10 depending on chassis model.
card-type
Syntax
card-type card-type
no card-type
Context
config>card
Description
This mandatory command adds an
CFM
to the device configuration for the slot. The card type can be
preprovisioned, meaning that the card does not need to be installed in the chassis.
A card must be provisioned before an MDA, MCM or port can be configured.
A card can only be provisioned in a slot that is vacant, meaning no other card can be provisioned
(configured) for that particular slot. To reconfigure a slot position, use the
no
form of this command to
remove the current information.
A card can only be provisioned in a slot if the card type is allowed in the slot. An error message is generated
if an attempt is made to provision a card type that is not allowed.
If a card is inserted that does not match the configured card type for the slot, then a medium severity alarm is
raised. The alarm is cleared when the correct card type is installed or the configuration is modified.
A high severity alarm is raised if an administratively enabled card is removed from the chassis. The alarm is
cleared when the correct card type is installed or the configuration is modified. A low severity trap is issued
when a card is removed that is administratively disabled.
Because the IOM-3 integrated card does not have the capability in install separate MDAs, the configuration
of the MDA is automatic. This configuration only includes the default parameters such as default buffer
Summary of Contents for 7710 SR SONET
