Alcatel-Lucent 7710 SR SONET, Configuration Manual

Page: 127 / 496

Interface Configuration
7710 SR OS Interface Configuration Guide Page 113
Basic Configuration
The most basic configuration must have the following:
• Identify chassis slot.
• Specify line card type (must be an allowed card type).
• Specify MCM slot for (not required for CMA)
• Specify MCM type (must be an allowed MCM type)
• Identify MDA slot.
• Specify MDA type (must be an allowed MDA type).
• Identify specific port to configure.
The following example displays some card configurations:
ALA-A>config# info
#--------------------------------------------------
echo "Card Configuration"
#--------------------------------------------------
card 1
card-type iom-xp
mcm 1
mcm-type mcm-xp
exit
mcm 3
mcm-type mcm-xp
exit
mda 1
mda-type m60-10/100eth-tx
exit
mda 3
mda-type m4-atmoc12/3-sfp
exit
mda 5
mda-type c8-10/100eth-tx
exit
mda 6
mda-type c1-1gb-sfp
exit
mda 7
mda-type c8-chds1
exit
mda 8
mda-type c4-ds3
exit
exit
#--------------------------------------------------
ALA-A> config#