Multilink-Bundle Port Commands
Page 246
7710 SR OS Interface Configuration Guide
mode
Syntax
mode
{
dce
|
dte
|
bidir
}
Context
config>port>multilink-bundle>mlfr>frame-relay
Description
This command configures the DCE/DTE mode of the Frame Relay interface.
Parameters
dce —
Enables the DCE mode.
dte —
Enables the DTE mode.
bidir —
Enables the bidirectional mode for LMI types ANSI and ITU.
n391dte
Syntax
n391dte intervals
no n391dte
Context
config>port>multilink-bundle>mlfr>frame-relay
Description
This command confgures the number of DTE full status polling intervals for the LMI.
Parameters
ntervals —
The number of exchanges to be done before requesting a full-status report. A value of 1
specifies to receive full-status messages only.
Values
1 — 255
n392dce
Syntax
n392dce threshold
no n392dce
Context
config>port>multilink-bundle>mlfr>frame-relay
Description
This command configures the DCE error threshold for the LMI.
Default
3
Parameters
threshold —
Specify the number of errors that will place the bundle in an operationally down state.
Values
1 — 10
Summary of Contents for 7710 SR SONET
