Alcatel-Lucent 7710 SR SONET, Configuration Manual

Page: 164 / 496

Service Management Tasks
Page 150 7710 SR OS Interface Configuration Guide
Modifying a Card Type
In order to modify the card type already provisioned for a specific slot, you must shutdown
existing port configurations and shutdown and remove all MDA or CMA configurations. After
removing MDA configurations, shutdown and remove the MCM from service before modifying
the card.
Note: CMAs do not require an MCM, therefore, if removing a CMA-type MDA from service, it is
not required to shutdown and remove an MCM before modifying the card.
Use the following CLI syntax to modify a card type already provisioned for a specific slot:
CLI Syntax:
config> port port-id
[no] shutdown
CLI Syntax:
config> card slot-number
mda mda-number
[no] mda-type mda-type
[no] shutdown
CLI Syntax:
config> card slot-number
shutdown
[no] mcm mcm-number
no mcm-type mcm-type
shutdown