Alcatel-Lucent 7710 SR SONET, Configuration Manual

Page: 292 / 496

SONET/SDH Path Commands
Page 266 7710 SR OS Interface Configuration Guide
ds3 — Configures the port or channel as DS-3 STS1/VC3 payload as DS-3.
e3 — Configures the port or channel as E-3 STS1/VC3 payload as E-3.
vt2 — Configures the path STS1 payload as vt2 as a virtual tributary group. Only allowed on STS-1 nodes.
(SONET VT container)
vt15 — Configures the path as a virtual tributary group. Only allowed on STS-1 nodes. (SONET VT
container)
ds1 — Configures the port or channel as DS1.vt15 or vt2 payload as DS-1
e1 — Configures VT2 payload as E-1.
report-alarm
Syntax [ no ] report-alarms [ pais ] [ plop ] [ prdi ] [ pplm ] [ prei ] [ puneq ] [ plcd ]
Context config>port>sonet-sdh>path
Description
This command enables logging of SONET (SDH) path alarms for a SONET-SDH port. Only path alarms can
be configured in the channel context.
The no form of this command disables logging of the specified alarms.
Parameters pais — Reports path alarm indication signal errors. When configured, pais alarms are raised and cleared.
Default
pais alarms are not issued
plop — Reports path loss of pointer (per tributary) errors. When configured, plop traps are raised but not
cleared.
Default plop traps are issued
prdi — Reports path remote defect indication errors. When configured, prdi alarms are raised and cleared.
Default
prdi alarms are not issued
pplm — Reports a path payload mismatch, as a result the channel will be operationally downed. When
configured, pplm traps are raised but not cleared.
Default pplm traps are issued
prei — Reports a path error condition raised by the remote as a result of b3 errors received from this node.
When configured, prei traps are raised but not cleared.
Default
prei traps are not issued
puneq — Reports path unequipped errors. Reports path unequipped signal errors.
Default puneq traps are issued
plcd — Reports path loss of codegroup delineation errors. It is applicable only when the value of xgig is set
to WAN.
Default plcd traps are not issued