Alcatel-Lucent 7710 SR SONET, Configuration Manual

Page: 241 / 496

Interface Configuration
7710 SR OS Interface Configuration Guide Page 215
rate
Syntax rate { max | kilobits-per-second }
no rate
Context config>port>ethernet>egress>exp-secondary-shaper
Description
This command is used to configure the shaper’s metering and optional profiling rates. The metering rate is
used by the system to configure the shaper’s PIR leaky bucket’s decrement rat. The decrement function emp-
ties the bucket while packets applied to the bucket attempt to fill it based on the each packets size. If the
bucket fills faster than how much is decremented per packet, the bucket’s depth eventually reaches it's vio-
late (PIR) threshold.
The no form of this command is used to restore the default metering and profiling rate to a policer.
Parameters { max | kilobits-per-second } — Specifying the keyword max or an explicit kilobits-per-second parameter
directly following the rate command is required and identifies the policer’s metering rate for the PIR
leaky bucket. When the shaper is first created, the metering rate defaults to max. The
kilobits-per-
second value must be expressed as an integer and defines the rate in kilobits-per-second. The integer
value is multiplied by 1,000 to derive the actual rate in bits-per-second.
Values 1—10000000 kbps
low-burst-max-class
Syntax class class-id
no class
Context config>port>ethernet>egress>exp-secondary-shaper
Description This command assigns the low burst maximum class to associate with the E
thernet egress expanded
secondary shaper
.
The no form of the command returns the class id for the E
thernet egress expanded secondary shaper
to
the default value.
Parameters class-id — Specifies the class identifier of the low burst max class for the shaper.
Values 1— 32
class
Syntax low-burst-max-class class-number rate { kilobits-per-second | max } [ monitor-threshold size-in-
kilobytes ]
no low-burst-max-class
Context config>port>ethernet>egress>exp-secondary-shaper
Description This command specifies the class to associate with the E
thernet egress expanded secondary shaper
.