Diagnostics Menu
41
14.12 Temperature Sensors
Shift+Diag|
|
|Temp Sensors
Displays temperatures of the CRT-300 circuit board (Load Temperature) and
regulator (Ambient Temperature). When the load temperature rises due to
continual testing, the fan turns on. If the load temperature goes too high,
testing circuitry is disabled and a warning appears.
14.13 Error Codes
Memory card error messages display text such as
Card not detected
or
Out of
memory
, or numeric error codes. Determine if the problem is the memory
card or the card drive.
CAUTION
: Do not insert or remove the memory card when the Cellcorder
Smart Media Card LED is lit.
Remove the troublesome card and, if available, insert a known-good card. If
the Cellcorder reads the card, the problem is the first memory card.
Attempt to read the defective memory card using the card drive attached to
the computer. If neither the Cellcorder nor the computer can read the card,
the card is defective or data on the card is corrupted.
If the computer reads the data successfully, copy the data to another memory
card and see if the Cellcorder can read it. If not, remove the memory card
from the Cellcorder.
Power down and restart the Cellcorder. Insert the memory card and attempt
to read it. If the error message still appears, the problem may be in the
Cellcorder. Contact the factory for assistance.
