Upgrading the Firmware
54
18 Upgrading the Firmware
Upgrade CRT-300 Cellcorder firmware using the memory card or the IR
ports on the computer and CRT-300. Upgrades are on the Web at
www.alber.com.
TIP
: Upgrading using the memory card is much faster than via IR.
WARNING
: Do not continue until you have the
.UPG
upgrade file ready.
You will be clearing the current firmware.
18.1 Upgrading Using the Memory Card
Download the .UPG file from the Albér Web site or an Albér CD to
Program Files/Alber/Alber Battery Analysis, then use Windows Explorer to
copy the file to the memory card.
ESC+Power On
With Cellcorder power off, insert the memory card into the Cellcorder. To
start in upgrade mode, press Esc+Power On. At the message
System is ready
to clear Flash memory for new program
, press Continue.
At
System ready to receive upgrade file. Select file transfer method
, press
Smart Media.
File transfer in progress
appears and the frame number counts
down. When
Upgrade successful. System is running Version nn.nnnnn
appears, press Continue.
18.2 Upgrading Using the IR Port
Download the .UPG file from the Albér Web site or an Albér CD to
Program Files/Alber/Alber Battery Analysis.
ESC+Power On
With Cellcorder power off, to start in upgrade mode, press Esc+Power On.
At the message
System is ready to clear Flash memory for new program
, to
upgrade press Continue.
At
System ready to receive upgrade file. Select file transfer method
, press
Infrared.
File transfer in progress
appears. The frame number does not count
down.
On the computer desktop, start the Battery Analysis System (BAS) program.
On the menu bar, click the
Start the Cellcorder Interface
button. On the next
box, click the CRT-300 button, then OK.
