MAP 600 – User’s Manual
Page 37
12. Navigator (AutoRoute)
There are three ways to create an AutoRoute; according to your needs, Alan MAP600 always provides you with the
suitable option for your use:
a) Method 1: GOTO –
It allows you to create an AutoRoute quickly and easily. If you move on the map using the
joystick, select the point where you wish to go, and then recall the
GOTO
function, Alan MAP600 will automatically
calculate the route from the point you are to the destination.
b) Method 2: Start Point, Middle Point, End Point –
Using this function, you can manually create a route by selecting
the start point, the middle point and the intermediate points, if necessary.
c) Method 3: Search, Nearest Search –
from these menus you can select a street, a point of interest (airport, city,
restaurant, etc.) and then recall the
GOTO
function.
Please find in detail the above-mentioned three methods:
12.1.a
Method 1:
This is the easier and quick method to create an AutoRoute:
1. Using the Joystick, move across the
Map
page and find the point where you wish to go and press the
button
for two seconds. At this point, the page as shown in Diagram 1 will appear.
1
2. Select
GOTO
: MAP600 will start to calculate a AutoRoute from the point you are, that becomes the start point,
to the selected point, that becomes the end point.
Now the GPS will start to provide with information, allowing you to reach the selected point.
12.1.b Method 2:
This method allows you to create your route while you are comfortably seated in you home’s armchair. You can enter a
start point and an end point, as well as intermediate points (up to 9).
1. Using the Joystick, you can select a point on the map and, by pressing the
button for 2 seconds, the menu
shown in diagram 1 will be displayed.
By selecting
Start Point, Middle Point or End point
, the previously
selected point will be used as point for the AutoRoute calculation.
1
2. Once all the desired points have been selected, it is then possible to calculate the AutoRoute. In order to do
this, you have to select
Calculate
from the menu shown in diagram 1.
12.1.c
Method 3:
This method allows you to select a street or a point of interest (airports, restaurants, hospitals, etc.) directly from a list. In
order to use this function, press the menu button from
Map
page (diagram 2), and select
Search
:
2
QuickTime™ and a
TIFF (LZW) decompressor
are needed to see this picture.
Summary of Contents for MAP600
Page 1: ......
