MAP 600 – User’s Manual
Page 14
7.3 Display backlight
If the environment lighting is not enough, you can press the
button in order to enable the display backlight. By
pressing the
button again will disable the display backlight. Moreover, it is possible to automatically disable the
display backlight after a specific time interval. For more details please refer to par. 8.1.
2
The display backlight increases the power consumption (battery). Please use this feature only when necessary.
2
When using the
Satellite
and
Map
pages, the display backlight is indicated as described in par.9.1 and 9.1.
7.4 Adjusting the display contrast
You can adjust the display contrast to optimize its readability, depending on the current lighting conditions. The display
contrast can be adjusted in two ways as explained below:
MODE 1
From the
Satellite
page:
a) Move the Joystick left or right respectively to reduce or increase the contrast. During this operation, the display
graphically shows the contrast level selected with the following image:
b) Press the
button to confirm or the
button to exit without saving the new contrast setting.
MODE 2
From any page (
Map, Data, Compass
):
a) Press the button twice, or press the button once, move the Joystick up or down to highlight
Main Menu
and
press the
button to confirm. Main Menu will appear.
b) Move the Joystick up or down to select
LCD Level
, then press the
button to confirm. Move the Joystick left or
right respectively to reduce or increase the contrast. During this operation, the display graphically shows the
contrast level selected with the following image:
c) Press the
button to confirm or the
button to exit without saving the new contrast setting.
Summary of Contents for MAP600
Page 1: ......
