MAP 600 – User’s Manual
Page 17
Condition
Beeper
type
Symbols on the Display
Left Turns:
300m
before
(<60Km/h),
600m
(60-
100Km/h), 900m (>100Km/h)
Left Turns:
100m
before
(<60Km/h),
400m
(60-
100Km/h), 600m (>100Km/h)
Left Turn
Keep Left
Left U-Turn
Right Turns:
300m
before
(<60Km/h),
600m
(60-
100Km/h), 900m (>100Km/h)
Right Turns:
100m
before
(<60Km/h),
400m
(60-
100Km/h), 600m (>100Km/h)
Right Turn
Keep Right
Right U-Turn
Opposite Direction
Reversal Inversion
!
. = Short Beep, ___ = Long Beep.
2
During Navigation function, the beeper is always active by default and it is not possible to disable it.
2
The beeper provides with a simple warning acoustic signaling without volume control and sound type selection.
8.3 Set2
8.3.a
Units
This setting specifies the units of measurement:
•
Mi/MPH
(Miles/Miles per Hour) – Specific for Anglo-Saxon countries.
•
KM/KMH
(KM/KM per Hour) – For
non
-Anglo-Saxon countries.
8.3.b
Language
This setting specifies the default language:
•
English
•
Dutch
•
Italian
•
German
•
French
•
Spanish
8.3.c
DMS Format
This setting specifies the DMS display format of degrees, minutes and seconds:
•
DD MM SS.S
•
DD MM.M
8.3.d
Waas/Egnos
This setting is only available when the Navigation mode is set to Normal (see Par. 8.2.b).
•
On
– Enables the additional satellite signal correction (if in receiving mode, “3D+GPS” will appear on the Satellite page).
•
Off
– Without the additional satellite signal correction. Select this setting only if you do not know exactly if Waas or Egnos
signal is currently received.
8.4 Format
•
Lat/Lon; UTM; MGRS;
Maidenhead Locator; Austria Grid; British Grid;
Finnish Grid;
German Grid;
Sweden Grid;
Swiss Grid; Taiwan Grid; USER TM.
2
Usually latitude and longitude coordinates are used in order to define a geographical position; anyway there are different systems
that can be selected for special applications. We suggest not making any change to the default setting except for particular
requirements.
Summary of Contents for MAP600
Page 1: ......
