AL-KO BKS 35, Instructions For Use Manual

Page: 25 / 210

25
GB
470 009_d
BKS 35 / 40 II
Sawn timber cross cuts
Use secure support (saw horse).
„
Do not secure the wood by foot or by an other
„
person.
Prevent logs from turning.
„
Direct the chainsaw so that no body part is found in
„
the extended steering range of the chainsaw.
Place the saw head directly next to the cutting edge
„
and allow the chainsaw to turn around this point.
Exercise no pressure at the the end of cutting.
Disposal
Do not dispose of old equipment,
batteries or accumulators as
household waste!
The machine, packaging, and accessories were made
with recyclable materials, and should be disposed of
accordingly.
Help with malfunctions
Malfunction Possible causes Remedy
Engine does not start No gasoline Fill with gasoline
Incorrect start course Observe starting directions
Sooty / defective spark plug Inspect spark plug / exchange
Dirty air filter Clean air filter
Dirty fuel filter Inspect fuel filter / exchange
Inadequate engine
performance, engine runs
lumpy
Incorrect choke position Place choke on the correct position
Sooty / defective spark plug Inspect spark plug / exchange
Dirty air filter Clean air filter
Dirty fire guard Inspect fire guard / exchange
Wrong carburetor setting Inspect carburetor installation
Customer service facility
Excessive smoke
development
Incorrect fuel mixture Empty fuel tank and fill with correct fuel
mixture
Wrong carburetor setting Inspect carburetor installation
Customer service facility
No chain lubrication Empty oil tank Inspect oil tank / fill with chainsaw oil
Dirty guide bar Clean oil feed hole / clean bar nut
For malfunctions that are not covered in this table, or that you cannot alleviate yourself, please turn to our
responsible customer service.