securityProbe 5ESV Manual
Updated until firmware 404m
- 95 -
24) Does the new HD Digital camera have the cable incorporated into it and what is the
length of that cable?
25) What if I need to extend the cameras further than 5 meters? Can I purchase what I
need from you?
26) What if I need to extend the cameras further than 15 meters? Can I use the older
digital cameras you offered before that connect to the SEC-5E BNC/RG-6
connectors? Can I use BNC-to-USB adapters?
27) Is this option a separate board or unit similar to your expansion units?
28) If I order this option will I be able to connect other types of third party cameras as I
did with my SEC-5E?
29) I noticed on the data sheet the 5ESV-X20 or X60 now ships with 2 expansion ports
instead of 4.
Does reducing the expansion ports also reduce the total number of sensors that can
be connected to the SEC-5ESV-X20 or X60?
30) Can I add my own SD flash card to the unit? If so how large can I use and what is
then stored on the SD card?
31) I noticed you have a different firmware for the securityProbe 5E and the SEC-5ES
base units, will there be another separate firmware for the SEC-5ESV-X20 or X60?
32) Speaking of firmware, do I need a separate firmware version or file if my unit has the
X20 or X60 dry contact inputs? For example my SEC-5ES-X20 or my SEC-5ESV-
X60?
33) Can I still use the same USB modems that worked or work on my securityProbe, my
SEC- 5E and 5ES base units?
34) Will all the sensors that work on my SEC, SEC-5E, SEC-5ES work on the new SEC-
5ESV-X20 or X60 base unit?
1) I cannot see the temperature sensor displayed on summary page
If after logging in for the first time with the temperature sensor connected, you may need to do
the following:-