securityProbe 5ESV Manual
Updated until firmware 404m
- 30 -
I) Notification thresholds
From this page you can carry out various operations as indicated above. Also view the
current status (normal, low critical, high critical etc). In the screen shot above you can see
the sensor is indicating a temperature of 29 degrees F, and a status of Normal. If you
click on the blue marker arrow ind
icated above by the “Set the required threshold” label
you can drag this marker to re-configure the thresholds. After dragging the marker click
“save” In the next screen shot you can see that this marker has been moved to make a
new threshold, and along with it the sensor status has changed.
If the marker is then dragged back to above the current reading temperature you should
see the status returns to a normal condition again.
Note: If this does not happen straight
away press your browsers refresh button.
I
f you wish to take a sensor offline then click on the “sensor currently” button. This will
offline the sensor without the need for you to physically unplug it.