securityProbe 5ESV Manual
Updated until firmware 404m
- 83 -
6) Mapping
The mapping feature allows for an instant visual feedback as to a sensors position, and status. It
is a useful monitoring tool for a set up with several sensors in different positions.
1. Adding a map
a)
First we need to add a picture file to be used as the map. This can be a blueprint of your office,
a 3D picture of your office/site being monitored, or a photo of the wiring closet you are monitoring.
b)
Now you can browse to the file on your HDD you wish to use.
This tutorial provides you the information needed to setup the mapping feature.
To get to the starting point of this tutorial:
Log in as administrator
Click the “map” tab