AKCP 5ESV-X20, User Manual, Page: 53 / 105

securityProbe 5ESV Manual
Updated until firmware 404m - 53 -
2. SNMP trap
First we will set up a notification via SNMP trap, so that when your sensor reaches a certain
threshold it will send a notification to your SNMP server.
a) After selecting to add an SNMP trap you will need to fill in the following information
b)
Once this information is correct you can press the “Add Trap Destination” button. After
clicking this you have the option of inputting another trap, or clicking on “Next”. Now you
can enter the following parameters:-
These parameters set the maximum number of times to send the trap notification and the
time interval between each notification.
This tutorial provides you the information needed to setup an SNMP trap.
To get to the starting point of this tutorial:

Log in as administrator

Click the “Notifications” tab

Choose “Notifications wizard”

Choose SNMP trap