securityProbe 5ESV Manual
Updated until firmware 404m
- 81 -
5. Picture Log
The camera can be used to automatically log a photo and send it as part of a notification.
Continuing our example of setting up the temperature sensor in this part of the tutorial we are
going to use the camera to capture an image from 2 seconds and 1 second before and 2 seconds
after the event. The event will be when the temperature sensor reading is at “High Critical”.
a)
Once this is done you can add it to the active notifications so your page should now look like
this:-
As you can see from the screen shot above, we have set the picture log to be created when the
temperate sensor is at a “High Critical” state.
This tutorial provides you the information needed to setup an MMS Notification.
To get to the starting point of this tutorial:
Log in as administrator
Select the notifications tab
Select notification wizard
Choose picture log as the notification type (follow previous notifications wizard
instructions)