manualshive.com logo in svg

Akai S3000XL, User Manual

The Akai S3000XL, a top-of-the-line sampler, offers unparalleled sound quality and versatility to music producers. Unlock the full potential of this iconic device with a comprehensive and detailed User Manual, available for free download at manualshive.com. Gain complete control over your music production journey with this invaluable resource.

Share
Download
background image

EDIT PROGRAM - SINGLE

S3000XL Operator’s Manual

Page 63

The soft keys along the bottom of the PROGRAM EDIT main screen are:

This shows the currently selected MAIN PROGRAM EDIT page.

This takes you to the parameters concerned with individual
keygroups. These include the keyboard spanning, filters,
envelopes, sample assignments, pitch and level adjustments,
individual output assignment, etc., for individual keygroups.

This takes you to the pages where you may set program
modulation parameters such as pitch bend ranges, LFO 1 and
LFO 2 parameters and parameters for the sostenuto pedal
functions.

This takes you to the MIDI page where you may set the program’s
MIDI channel, polyphony, transpose and other functions.

This takes you to the OUTPUT page where you may set the
program’s overall level, individual output assignment, effects send
level, pan position and other parameters.

This takes you to the AUTO PAN section where you may set
parameters that affect the program’s auto pan functions.

This takes you to the TUNE pages where you may set the
program’s overall tuning as well as select and create alternative
tunings and temperaments.

This is not a page key but an ‘action’ key for deleting programs. Its
function is described above.

We will now look at the functions of these pages. We will skip 

 and 

 for the

moment and look at the function of 

, 

, 

 and 

 first as these affect

the program as a whole.

Summary of Contents for S3000XL


























































































































































































































































































































Reviews:

No comments

Related manuals for S3000XL

ELTA music Polivoks Mini Manual preview
Polivoks Mini
Brand: ELTA music Pages: 2
Arturia PROPHET-VS V User Manual preview
PROPHET-VS V
Brand: Arturia Pages: 114
Waldorf MicroWave II User Manual preview
MicroWave II
Brand: Waldorf Pages: 126
360 Systems MIDI Bass Operation Manual preview
MIDI Bass
Brand: 360 Systems Pages: 6
BEL 2150 Operator'S Manual preview
2150
Brand: BEL Pages: 10
Kawai MK 10 Owner'S Manual preview
MK 10
Brand: Kawai Pages: 34
Keithley 3930A Service Manual preview
3930A
Brand: Keithley Pages: 55
Grayscale Supercell User Manual preview
Supercell
Brand: Grayscale Pages: 6
Greenface Labs THE SPANKULATOR User Manual preview
THE SPANKULATOR
Brand: Greenface Labs Pages: 22
ELECTRONIC MUSIC LABORATORIES ElectroComp EML - 200 Manual preview
ElectroComp EML - 200
Brand: ELECTRONIC MUSIC LABORATORIES Pages: 28

Brands by name

Popular brands

Load more brands