manualshive.com logo in svg

Akai MPC 3000, Operator'S Manual, Page: 92 / 276

Share
Download
Akai MPC 3000 Operator'S Manual Download Page 92

Page 79

Chapter 4: Editing Sequence

To rearrange tracks, first enter the desired sequence number. Then
enter the track number to be moved in the 

Place track

 field. In

the 

Before track

 field, enter the number of the track that the

moved track will be inserted before. Press 

<Do it> 

to execute the

move.

Inserting Blank Bars Into a Sequence

This feature inserts a specified number of blank bars into the
current sequence. Select option 3 (

Insert blank bars

) from

the SEQ EDIT key menu, and the following screen will appear:

========== Insert Blank Bars ===========
Sequence:12-Sequence_name
Number of bars:  4
Time signature: 4/ 4
Insert before bar:  4

========================================
<Do it>

The fields and soft key are:

• The 

Sequence

 field:

This is the sequence into which the bars will be inserted. The
sequence’s name is shown to the right.

• The 

Number of bars

 field:

This is the number of blank bars to be inserted.

• The 

Time signature

 field:

This is the time signature of the bars to be inserted. This is actually
two fields—one for each part of the time signature. The range of the
first part is from 1 to 31; the second part is a choice field with four
selections: 4, 8, 16, and 32.

• The 

Insert before bar

 field:

This field specifies the bar number before which the new bars will
be inserted. To insert bars after the end of the sequence, enter a
number one higher than that of the last bar in the sequence.

• The 

<Do it>

 soft key:

Pressing this soft key performs the insertion according to the above-
displayed parameters.

COMMENT: If the sequence is set to loop to an earlier bar (in
the time signature/ending status screen) and the new bars
are inserted before the loop bar, the bar number specified in

Summary of Contents for MPC 3000





















































































































































































































































































Reviews:

No comments