manualshive.com logo in svg

Akai MPC 3000, Operator'S Manual, Page: 9 / 276

Share
Download
Akai MPC 3000 Operator'S Manual Download Page 9

v

LITHIUM BATTERY

This product uses aLithium Battery for memory back-up.  The lithium battery should only be
replaced by qualified service personnel.  improper handling may cause risk of explosion.

24A-En

FCC warning

This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.  These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment.  This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications.  Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.

21A-En

AVIS POUR LES ACHETEURS CANADIENS DU MPC3000

Le présent appareil numérique n’ément pas des bruits radioélectriques dépassant les
limites applicables aux appareils numériques de la Class A prescrites dans le Règlement
sur le brouillage radioélectrique édicté par le ministère des Communications du Canada.

27-F

This digital apparatus does not exceed the Class A limits for radio noise emissions
from digital apparatus set out in the Radio Interference Regulations of the Canadian
Department of Communications.

27-En

FÜR KUNDEN IN DER BUNDESREPUBLIK DEUTSCHLAND

Bescheinigung von AKAI
Hiermit wird bescheinigt, daß das Gerät AKAI

MPC3000

in Übereinstimmung mit den Bestimmungen der

Amtsblattverfügung 1046/1984

funkentstört ist.
Der Deutschen Bundespostwurde das Inverkehrbringen dieses Gerätes angezeigt und
die Berichtigung zur Überprüfung der Serie auf Einhaltung der Bestimmungen eingeräumt.
AKAI ELECTRIC CO., LTD.

17B-G

COPYRIGHT NOTICE

The AKAI MPC3000 is a computer-based instrument, and as such contains and uses
software in ROMs and disks.  This software, and all related documentation, including this
Operator’s Manual, contain proprietary information which is protected by copyright laws.  All
rights are reserved.  No part of the software or its documentation may be copied, transferred
or modified.  You may copy the operating software and any samples, programs, etc.
contained on disks for your own personal use.  All other copies of the software are in violation
of copyright laws.  You may not distribute copies of the software to others, or transfer the
software to another computer by electronic means.  You may not modify, adapt, translate,
lease, distribute, resell for profit or create derivative works based on the software and its
related documentation or any part there of without prior written consent from AKAI Electric
Co., Ltd, Yokohama, Japan.

Summary of Contents for MPC 3000





















































































































































































































































































Reviews:

No comments