manualshive.com logo in svg

Akai MPC 3000, Operator'S Manual, Page: 19 / 276

Share
Download
Akai MPC 3000 Operator'S Manual Download Page 19

Chapter 1: Introduction

Page 5

• Programmable tempo changes in mid-sequence or mid-song are
supported.
• Mid-sequence time signature changes are supported.
• Auto Punch feature allows automated punch-in and/or punch-out
at preset times within the sequence.
• Two foot switch inputs allow functions such as Play/Stop and
Punch In/Out to be remotely controlled.
• Swing feature provides a useful method of adjusting the rhythmic
feel of your tracks.
• 16 velocity- and pressure-sensitive front panel drum pads and 4
pad banks provide a total of 64 pad/bank combinations.
• Note Variation feature allows a unique value of tuning, decay,
attack or filter frequency to be recorded with each drum note.
• MIDI sustain pedal messages can be specially processed so that
multiple overdubs on the same track of a sequence can use the
sustain pedal independently, without interaction.

Summary of Contents for MPC 3000





















































































































































































































































































Reviews:

No comments