manualshive.com logo in svg

Akai MPC 3000, Operator'S Manual, Page: 6 / 276

Share
Download
Akai MPC 3000 Operator'S Manual Download Page 6

ii

WARNING!!

To prevent fire or shock hazard, do not expose this appliance to rain or moisture.

1-En

The lightning flash with the arrowhead symbol superimposed across a graphical
representation of a person, within an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous voltage” within the product’s enclosure;
that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intented to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.

CAUTION

RISK OF ELECTRIC SHOCK

          DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
                  DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THE SYMBOLS ARE RULED BY UL STANDARDS (U.S.A).

5A-En

Summary of Contents for MPC 3000





















































































































































































































































































Reviews:

No comments