manualshive.com logo in svg

Akai MPC 3000, Operator'S Manual, Page: 13 / 276

Share
Download
Akai MPC 3000 Operator'S Manual Download Page 13

ix

Loading, Erasing, or Renaming Files ........................................................................ 173

Loading a SEQ File (Single Sequence) ......................................................... 175
Loading an ALL File (All Sequences and Songs) ......................................... 177
Loading a SND File (Single Sound) .............................................................. 177
Loading a PGM File (Single Program and Sounds) ..................................... 178
Loading an APS File (All Programs and Sounds) ........................................ 178
Loading an MPC60 Version 1 or 2 SET or ST1 File ..................................... 179
Loading a PAR File (System Parameters) .................................................... 182
Files That Automatically Load on Power-Up ............................................... 182

Loading Sample Files From Akai S1000/S3000 Disks ............................................. 184
Formatting a Floppy Disk .......................................................................................... 186
Using a SCSI Hard Disk ............................................................................................ 187
Copying an Entire Floppy Disk ................................................................................. 191

Chapter 10: Syncing to Tape and Other Devices ......................................................... 193

The SYNC Screen ....................................................................................................... 194
Syncing to Tape and Other Devices: Examples ........................................................ 201

Syncing to MIDI Clock ................................................................................... 201
Syncing to SMPTE ......................................................................................... 201
Syncing to MIDI Time Code .......................................................................... 204
Syncing to FSK24 ........................................................................................... 204
Syncing to 1/4-note Clicks .............................................................................. 206

Chapter 11: MIDI Functions ............................................................................................. 207

Assigning Pads to Note Numbers .............................................................................. 208
MIDI Receive Channel, Local Mode, Soft Thru, Note Variation Controller

Assign and Sustain Pedal Processing ................................................................. 210

MIDI Input Filter ....................................................................................................... 213
Turning All Notes Off ................................................................................................. 216
The MIDI Implementation Charts ............................................................................ 217

Appendix ............................................................................................................................... 219

Technical Specifications ............................................................................................. 220
Answers to Frequent Questions ................................................................................ 222
Contents of Disk Files ................................................................................................ 225
MPC3000 Options ...................................................................................................... 229

The SMPTE Option ........................................................................................ 229
Expanding the Sound Memory ...................................................................... 229
The Video Output Option .............................................................................. 230

Index ...................................................................................................................................... 231

Summary of Contents for MPC 3000





















































































































































































































































































Reviews:

No comments